Replacement matching for the existing mixer assembly
Match replacement mixer blades to the shaft, blade arrangement and vessel geometry of your machine. Send the mixer identification, blade drawing and material information to define the correct replacement scope.
A mixer blade is part of an assembly, so its shape should be reviewed with the shaft and mixing vessel. For a replacement enquiry, identify the blade position, mounting method and the other components that will remain in service.
Provide the process material and the reason for replacement. Worn edges, a damaged mounting area and a change in the mixing task call for different information. Keep the original geometry and any proposed change clearly separated during the technical review.
Blade geometry
Record the overall dimensions, blade profile, orientation and position within the assembly. A photograph alone may not establish these details.
Shaft connection
Include the shaft diameter and the details of the bore, fixing holes, key or other locating features used by your machine.
Replacement scope
State whether you need one blade, a matched set or a complete assembly. Identify which existing components will be reused.
Equipment Context
Where This Part Is Used
Mixer families listed on this page provide selection context. Shaft fit, blade geometry and the specific machine build require separate confirmation.
Equipment Families
The part family is used on these machines. Size, version and fixing are confirmed for your actual machine before quoting.
Compare SRL-Z high-speed mixing units for plastic material preparation. Specify formulation, batch size, mixing sequence and the transfer to downstream equipment.
Specify an SRL-W horizontal mixer for your material-preparation task. Review batch loading, mixing result, discharge, cleaning and equipment connections.
Plan a laboratory mixer for small-batch formulation work. Specify sample quantity, ingredient properties, process variables, cleaning and the evaluation method.
Provide the model, serial number where available and photographs of the assembled blade arrangement.
02
Record the component
Send a drawing or sample information, including mounting dimensions and any original material specification.
03
Review the assembly fit
Check blade orientation, shaft connection and vessel clearances against the agreed drawing.
Maintenance Reference
Use the mixer manufacturer’s isolation and maintenance instructions when accessing the assembly. Include the observed wear pattern in the replacement enquiry; no fixed replacement interval is specified here.
Technical FAQ
Questions About This Part
Need a quick answer for your machine? Ask Maggie directly.
Does the mixer model alone identify the blade?
Treat the model as the starting point. Include the serial number or build details and the actual blade drawing because the installed assembly still needs to be checked.
Can I request only one replacement blade?
State the quantity and the position of the blade you need. The matching review should also identify the other blades and components that will remain in the assembly.
Can the blade material be changed?
Describe the process material, operating conditions and the reason for the proposed change. A material substitution should be evaluated as a specification change, not assumed from the appearance of the original blade.
Part Matching Request
Request Replacement Matching
Send the machine identification, component drawing or clear photographs, and the quantity you need. We can use these details to review the exact replacement scope with you.
Mixer Components 
