QTech-Machinery supplied a complete PE core pipe extrusion line according to the customer’s product size, production process and factory layout. The line was engineered as a continuous extrusion system for PE roll core tube production, combining stable output with accurate downstream control.
The main extrusion section used an SJ75/33 single screw extruder with alloy screw and barrel, inverter speed control, segmented heating and PLC-based operation. This ensured stable PE plasticizing and continuous material flow into the mould.
The forming section used a customized PE core pipe mould designed for the required inner diameter and wall thickness range. After mould forming, the pipe entered the 160 vacuum calibration tank, where vacuum sizing and spray cooling helped maintain pipe roundness and surface quality.
For downstream pulling, QTech-Machinery configured a three-claw haul-off machine with servo motors. This allowed accurate speed matching between extrusion output and pipe traction. At the end of the line, the 160 chipless cutting machine completed automatic cutting according to encoder-measured length, helping produce clean pipe ends for roll core applications.
The complete system was delivered as an integrated PE winding core pipe machine, suitable for stable and repeatable production.