The maintenance and maintenance strategy of servo motor in cutting machine mainly includes the following steps:
1. Regular cleaning: Regularly clean the servo motor and its surrounding environment to ensure no dust and no impurities. Tools such as a soft brush or a hair dryer can be used for cleaning to avoid dust and dirt affecting the operation of the motor.
2. Lubrication: According to the guidance provided by the manufacturer, regularly check the lubrication of the servo motor and carry out the necessary lubrication. Use appropriate lubricants and lubricate according to the specified lubrication points and cycles to maintain the normal operation and life of the motor.
3. Fastening: Regularly check the fasteners of the servo motor (such as screws, nuts, etc.) to ensure that they are in the correct position and fastened well. If loose or damaged fasteners are found, they should be repaired or replaced in time.
4. Cooling system maintenance: If the servo motor is equipped with a cooling system (such as fans, radiators, etc.), it is necessary to regularly clean and check the cooling system to ensure its normal operation. Preventing overheating can adversely affect motor performance and life.
5. Cable and connector inspection : Regularly check the cables and connectors of the servo motor, including the encoder connection cable of the servo motor and the power connector of the servo motor, to confirm that the connection is firm and intact.
6. Dynamic test: Regularly carry out dynamic test of servo motor to check its operating status and performance to ensure that the motor is in normal condition.
It should be noted that although the servo motor has a high level of protection and can be used in places with dusty, wet or oil droplets, it should be placed in a relatively clean environment as far as possible to avoid a wet and dusty environment and prevent the oil of the reduction gear from entering the servo motor and affecting the normal operation of the motor.
The above strategy can effectively extend the service life of the servo motor, improve production efficiency and reduce the failure rate, which is an important step in the maintenance and maintenance of the servo motor in the cutting machine.
